Loader

Product

Antimony Metal Ingot

Product Information

Product Name Antimony
CAS Number 7440-36-0
Molecular Weight 121.75
Molecular Formula Sb

Application Advantage

Antimony is a brittle metal and is a poor conductor of heat and electricity. Very pure antimony is used to make certain types of semiconductor devices, such as diodes and infrared detectors. Antimony is alloyed with lead to increase lead's durability. Antimony alloys are also used in batteries, low friction metals, type metal and cable sheathing, among other products. Antimony compounds are used to make flame-proofing materials, paints, ceramic enamels, glass and pottery.

Product Specification

Purity Of Antimony as SB ≥ 99.65 %
Arsenic as As ≤ 300 ppm
Lead as Pb ≤ 350 ppm
Iron as Fe ≤ 15 ppm
Sodium as Na ≤ 15 ppm
Zinc as Zn ≤ 10 ppm
Total Impurities ≤ 0.05 %
Colour Silvery White

Packing

25 Kgs Ingot stacked on wooden pallet, 1 MT per pallet. Other packing options are available upon request.

Potassium Pyroantimonate

Potassium Pyroantimonate

Potassium pyroantimonate (PPA), an antimony based compound, is a white powder used as a crosslinker. Crosslinkers are used in many industries including the manufacturing of water gel explosives, oil well stimulants and cleaners and hydroseeding.

Product Specification

Chemical NamePOTASSIUM PYROANTIMONATE
Synonyms POTASSIUM PYROANTIMONATE;POTASSIUM ANTIMONATE (PYRO);POTASSIUM PYROANTIMONATE TS
CBNumber CB7422454
Molecular Formula H2K2O7Sb2
Formula Weight 435.73

Typical Chemical Composition

Minimum Total Antimony, Sb (%) 47.0 –49.0


Typical Physical Properties

Specific Gravity @25° C 3.34
Water Solubility @ 25° C (g/kg) 2.9
Additives for Explosives

SI-PPA crosslinkers for explosives and energetic slurry systems. A typical water gel explosive consists of a water solution of nitrates blended with guar gum and a crosslinker and then mixed with solid oxidizers and packaged with a fuel source.

Uses:- Used as a cross linker in the manufacturing of water gel explosives, oil well stimulants and hydro seeding.

Advantages

Potassium Pyroantimonate is the best choice for the crosslinker of packaged water gel or slurries systems explosives. The crosslinker must delay gelation so that solids can be easily dispersed and the slurry can be packed but then rapidly and completely gel after packing. The crosslinker must also be easily dispersed into the system. The choice of crosslinker can affect many properties of the explosive. Using an antimony based crosslinker has been proven to improve stability and consistency of the explosive slurry, thermo chemical energy efficiency, safety degree in high velocity impact tests, velocity of detonation, and water resistance.

Physical Data

Form Dry, White Powder
Bulk Density 1.2 t/m³
Average Grain Size 25 to 30 µ (Sieved on 120 mesh)
Solubility (Water 25°C) 2.9%

Analysis

Sb 45 to 47 wt. %
K14 to 15 wt. %
Ph 10
Purity98 to 99 wt. %
Crosslinking Ability 24 Hrs.
Specific Gravity (25° C) 3.34 g/cc

Packing

Packed in 50 Kg multiwall paper drum with polyethylene bag inside.

Net Weight 50 Kg.

Gross Weight 53 Kg.

Bulk bag as per client’s requirement.

20’ maritime container load max 20 MT (Net)

Antimony Trioxide

Product Information

Product Name Antimony
CAS Number 7440-36-0
Molecular Weight 121.75
Molecular Formula Sb

Application Advantage

It is used as a flame retardant in ABS, other plastics and yarn, a flocculant in the production of titanium dioxide and in the production of glass, paint and adhesives. It is also used as an ion-exchange resin for a number if cations in acidic solution including Na+ and as a polymerization and oxidation catalyst.

Product Information

FormDry, Free flowing white powder
Bulk Density 3.2 t/m³
Average Grain Size 0.025 μ from XRD Schrrer calculation
Solubility (Water 25°C) Insoluble

Product Specification

Sb 75.2 wt. % minimum
As Not detectable
Fe 0.005 wt. %
Pb 0.099 wt. %
Sn 0.18 wt. %
Cl 0.019 wt. %
Sb2O5 > 99.5 %
Sb2O3 99.5 % based on Sb.
pH 4 to 6
Purity < 0.5 %
Specific Gravity (25° C) 3.6
Molecular Weight 323.5
Refractive Index 1.7
Surface Area ~ 50 m2/g

Packing

Packed in 50 Kg multiwall paper drum with polyethylene bag inside. Bulk bag as per client’s requirement.
Net Weight 50 Kg., Gross Weight 53 Kg.
20’ maritime container load max 20 MT (Net)

Antimony Pentoxide

Colloidal Antimony Pentoxide : Flame Retardant Additives

Shiv HydroMet , offers colloidal antimony pentoxide in various forms for use as synergists with halogenated flame retardants. And specially designed for thin coatings on textiles and can be incorporated in the thin fibres for nonwovens & textile weaving.

Antimony Pentoxide Powder :

Aqueous dispersions of colloidal antimony pentoxide are spray-dried to make antimony pentoxide powders. These powders will not tint the product because they are 10 to 40 micron agglomerates of nano-sized particles.

These powders of colloidal antimony pentoxide readily disperse to nanometer-sized particles in various solvents and polymers.

Product Specification

ClassificationAnimony Pentoxide
Formula Sb2O5
CAS No 1314-60-9
EINECS NO215-237-7
ApplicationColloidal or Dry power

Shiv HydroMet / with use of our technology we are able to provide wide product ranges as your application needs

WT. %(Sb2O5)27 to 99.99 %
MediaWater –Polyester Polyol – Tertiary Amine – Unsaturated – Polyester – Polypropylene – Powder
Primary Particle Size(nm : 5 to 60)
PH 2.5 to 9.5
Viscosity 5 cp to 5000 cp
Appearance white milky
Uses \ Applications

Used as a cross linker in the manufacturing of water gel explosives,
oil well stimulants and hydro seeding.


Colloids:

  • Textile Coatings
  • Spray –Bonded Non –Wovens
  • Adhesives
  • Fibers
  • Polyester Laminates
  • Urethane
  • Elastomers
  • Epoxy Resins
  • Ketone Solutions
  • High Temp Cure–Upe
  • Room Temp Cure–Upe
  • Polyester/Fiberglass


Powder:

  • Adhesives
  • Fibers
  • Epoxy Resins
  • Ketone Solutions
  • Thermoplastic Polyester
  • Vinyl
  • Abs
  • Hips
  • Polypropylene
  • Polyolefin
  • Metals Passivation
  • Polypropylene Fiber
Advantages
  • » Its particle size is 100 times smaller than that of Sb2O3, and its consumption is less than of Sb2O3.
  • » It will not block the pore plate when used for melting spinning.
  • » It will not affect the transparency of plastics that are expected to be transparent.
  • » It will not affect the feel and color of textile when used for flame-proof treatment of textile.
  • » Low in refracitive index, it canimprove the electrical property of potting compound.
  • » Able to absord metal ions, it can imporve the electrical property of potting compound.
  • » Even in dispersion, strong in penetration andeasy for use, it is excellent in flame retardance.
  • » Better penetration of the substrate.

  • » Greater cost effectiveness and improved color matching in mass tone colors.

  • » Less pigmenting or whitening effect for deep mass tone colors.

  • » Translucency for applications such as coatings, films, and laminates.

  • » Easier handling and processing; liquid dispersions will not clog spray guns.

  • » Suspension stability in low viscosity systems.

  • » High flame retardant efficiency for minimal added weight or change in hand.

  • » Maintenance of physical properties in thin films and fine denier fibers.
Physical Data
Form Dry, White Powder
Bulk Density 1.2 t/m³
Average Grain Size 25 to 30 µ (Sieved on 120 mesh)
Solubility (Water 25°C) 2.9%
Analysis
Sb 75.2 wt. % minimum
As Not detectable
Fe 0.005 wt. %
Pb 0.099 wt. %
Sn 0.18 wt. %
Sn 0.18 wt. %
Sb2O5 >99.5 %
Sb2O3 < 0.5 %
pH 4 to 6
Purity 99.5 % based on Sb.
Specific Gravity (25° C) 3.6
Molecular Weight 323.5
Refractive Index 1.7
Surface Area~ 50 m2/g
Packing

Packed in 50 Kg multiwall paper drum with polyethylene bag inside. Bulk bag as per client’s requirement.

Net Weight 50 Kg., Gross Weight 53 Kg.

20’ maritime container load max 20 MT (Net)

Customized Catalysts

Customized catalysts:

We are leading manufacturer of catalysts for automotive applications and petrochemicals. We provide customized solution for metal oxides and zeolite based heterogeneous catalysts. Our expertise are automotive catalyst, fine chemicals catalysts and petrochemicals catalyst manufacturing.

We have state of the art manufacturing facility of catalyst manufacturing for generic and customized catalysts as per required properties and catalytic activity.

For more info, please contact us with your requirements.
Product Specification:

Customized automotive applications, metal oxides, zeolites, mesoporous materials as per end user specifications.

Usage / Applications:

Automotive, fine chemicals manufacturing, petrochemicals manufacturing.

Physical Data:

as per customer specifications

Packing:

50 kg, Customized

Catalyst support powder:

Catalyst support powder:

We provide you catalyst supports in powder form for catalytic applications as per end user requirement. User can shape it as per its usage. We also provide shaped support as per customer's requirement

For more info, please contact us with your requirements.
Product Specification:

Silica, alumina and other refractory oxides, rare earth oxides and transition metal oxides and modified oxide support as per end uses.

Usage / Applications:

support for heterogeneous catalysts and heterogenized homogeneous catalysts.

Physical Data:

as per customer specifications

Packing:

50 kg, Customized

ABOUT

Shiv HydroMet strives to be the world’s leading supplier of antimony based specialty chemicals, flame retardants as well as leading provider of customized catalysis solutions. We supply our customers with products that meet their exacting specifications while providing world-class customer service. Most importantly, we operate in an environmentally friendly and socially conscious manner.

Shiv HydroMet has been operating under these principles for over twenty years.

We remain focused on providing quality material and personalized customer service to each and every customer.

CONTACT